Diesel forced air heater 220kW

The diesel forced air heater manufactured by Master helps to efficiently heat different rooms and shelters. This diesel forced air heater can be used to warm up stages using heat pipes to direct heat to the right places.

Heat pipes come in two versions: a four-pipe system where the diameter of one pipe is 320 mm, or one large pipe system where the diameter of one pipe is 730 mm; the length of one pipe is 7.6 metres.

Conditions for use:

  • Upon starting up, the heater requires 9.2 kW of power; afterwards, it consumes 4.2 kW
  • The heater requires one 16 A three-phase power cord
  • The cords need to be correctly functional because otherwise, the heater does not start up
  • The power cord should be discrete and, if possible, in the immediate vicinity of the electrical board since the power inside the cord starts to decrease at a certain length
  • The customer must consider possible expenses in cases where we have to come to the site for reasons not caused by us (e.g. there is a problem with electricity); in these cases, our hourly rate of €45 + VAT will apply (minimum cost €45 + VAT)
  • At events, the hourly rate of the heater technician is €30 + VAT

Technical data:

  • Wattage: 220 kW
  • Air flow: 12,500 m3/h
  • Fuel consumption: ca 19.5 l/h
  • Dimensions (l x w x h): 2510 x 840 x 1440 mm
  • Power consumption: 7.6 A (in constant operation)
  • Smoke pipe Ø: 200 mm
  • Hot air outlet Ø: 4×320 mm or 1×730 mm
  • Net weight: 326 kg
  • Supply voltage: 400/50 V/Hz
  • A summer-winter switch only for ventilation
  • Fuel preheater
  • High-efficiency heat exchanger

Consult our specialists

You have an idea, but do not know how to put it into practice? Contact us, and together we will find a solution for you!

Vaata lisaks

Read more